Overview

The spray tower purifies the exhaust gas, which is suitable for the treatment of continuous and intermittent exhaust gas; the process is simple, the management, operation and maintenance are quite convenient and concise, and will not cause any impact on the production of the workshop; it has a wide range of applications and can purify a variety of pollution at the same time low pressure drop, high operating flexibility, and good defogging performance; the tower body can be made of PP/PP/PVC and other materials according to the actual situation; the packing adopts high-efficiency, low-resistance Pall rings and plastic balls It can thoroughly remove odors and harmful substances in the gas.

1. The main body of the spray tower The body of the scrubber includes the exhaust gas inlet, outlet, viewing window, maintenance access hole and the structure used for support and fixing inside the scrubber to ensure the corrosion resistance of the equipment itself and increase its service life.

2. Filling layer: Filling generally refers to materials that are filled in other objects. In chemical engineering, packing refers to inert solid materials installed in packed towers, such as Pall rings and Raschig rings, etc., whose function is to increase the contact surface of gas-liquid and make them strongly mix with each other. In chemical products, fillers, also known as fillers, refer to solid materials used to improve processing performance, mechanical properties of products and/or reduce costs.

3. Demister layer: Since the spraying of the water cycle will generate a large amount of water vapor, which will affect the subsequent steps, the demist layer is an indispensable part. Multi-choice to defog the filler.

4. Circulating sprinkler pipeline: the main function is to send circulating water to the sprinkler system

5. Circulating water tank: It is integrated with the spray tower. The capacity of the water tank is 2-3 minutes of circulating water. The inside of the water tank is equipped with a float type liquid level controller, and an inlet overflow port and a discharge port for washing water are reserved. .

Features

It has the characteristics of small footprint, convenient transportation and installation. The use of domestic advanced high-grade composite materials and high-temperature resistant FRP resin grades can increase the degree of wear resistance and high temperature resistance, and greatly extend the service life. It is also an impact type dedusting desulfurizer with side entry and ejection, which makes the flue gas directly impact the water surface, saves water and reduces pollution, is easy to operate and maintain, low operating cost, and has good dehydration effect. It is an economical and practical wet dedusting desulfurizer. .

When the dust collector is used for sulfur and dust removal, it has safe operation, saves water and electricity, is economical, practical and easy to operate, requires no maintenance, low cost, occupies less land, has high dust removal efficiency, and has complete functions of smoke, dust, and sulfur removal. It is a dust recovery system suitable for power plant boilers, cement plants, non-ferrous smelting, light industry, pharmaceutical factories and other industries.

Field of application

It can be widely used in acid and alkali discharges from industries such as painting, coating, electroplating, papermaking, printing, furniture, enameled wire, pharmaceuticals, feed, breeding plants, oil refineries, chemicals, asphalt, plastics, coatings, rubber, sewage, garbage, etc. Purification treatment of waste gas and VOC organic gas.